|
Speakers |
Looking
to upgrade your sound system without
a big ticket price tag? This pair of
5.25" 2 ohm coaxial speakers are a
perfect fit upgrade to your 2006
Harman/Kardon / Harley-Davidson
factory sound system. They are
designed to fit your stock fairing
and speaker rings, and provide a
cost effective improvement in sound
quality.
Key Features:
- 1"
PEI dome coax-mounted tweeter
-
5.25" polypropylene mid-range cone
- 8
oz. magnet with rubber cover
- ¼”
thick foam gasket on mounting
surface
-
Sold in pairs
Specifications:
- 2
ohm, 25mm voice coil
- 40
Watts RMS, 120 Watts Peak (Rated -
40 Watts)
Note: Stock 2006 Harman/Kardon /
Harley-Davidson radios utilize 2
ohm speaker outputs. These
speakers are designed to replace
2006 factory speakers only. They
should never be connected to any
of our 4 ohm amplifiers. Failure
to follow this guideline can cause
damage to your speakers, and will
void your warranty.
Want to find
out if this Hawg Wired part will fit
your Harley?
See our
fitment guide for more information.
|
BT502-40
2 Ohm
Upgrade Speakers
Kit
Includes:
- 2
– BT502-40 Coaxial Upgrade
Speakers
-
Installation Instructions
|
|
The first step down the path of high fidelity are the noise makers. This pair of 5.25" coaxial speakers that fit your stock Harley™ fairing an speaker rings are a perfect addition to our
CS1502 Amplifier Kit.
Key Features:
-
1"
PEI dome coax-mounted tweeter
-
5.25" polypropylene mid-range cone
-
8
oz. magnet with rubber boot
-
¼”
thick foam gasket on mounting
surface
-
Sold in pairs
Specifications
-
4 ohm, 25mm voice coil
-
50 Watts RMS, 150 Watts Peak (Rated - 50 Watts)
Note: Stock 1998-2006
Harley-Davidson radios utilize 2
ohm or 8 ohm speaker outputs. Due
to the 4 ohm voice coils used in
these speakers (and most other
aftermarket speakers), they should
not be connected directly to the
stock radio speaker outputs.
Failure to follow this guideline
can cause damage to your radio,
and will void your warranty.
Want to find
out if this Hawg Wired part will fit
your Harley?
See our
fitment guide for more information. |
BT504-50 Speaker Kit
 Kit Includes:
|
|
Like
sporting a lot of chrome on your
hawg? Here's the answer. Built
exactly like our standard 4 ohm
performance speakers (red), this
pair of chromed cone 5.25" 4 ohm
coaxial speakers are a chrome
freak's dream come true. They are
designed to fit your stock fairing
and speaker rings, and are the
perfect addition to any of our
amplifier kits.
Key Features:
- 1"
PEI dome coax-mounted tweeter
-
5.25" polypropylene mid-range cone
-
Chrome finished speaker cone
- 8
oz. magnet with rubber boot
- ¼”
thick foam gasket on mounting
surface
-
Sold in pairs
Specifications:
- 4
ohm, 25mm voice coil
- 50
Watts RMS, 150 Watts Peak (Rated -
50 Watts)
Note: Stock 1998-2006
Harley-Davidson radios utilize 2
ohm or 8 ohm speaker outputs. Due
to the 4 ohm voice coils used in
these speakers (and most other
aftermarket speakers), they should
not be connected directly to the
stock radio speaker outputs.
Failure to follow this guideline
can cause damage to your radio,
and will void your warranty.
Want to find
out if this Hawg Wired part will fit
your Harley?
See our
fitment guide for more information.
|
BT504-50C
4 Ohm Performance Speakers
Kit Includes:
-
2 – BT504C-50 5.25" Coaxial
Performance Speakers
-
Installation Instruction
|
|
Looking
to upgrade your sound system without
a big ticket price tag? This pair of
5.25" 8 ohm coaxial speakers are a
perfect fit upgrade to your
1998-2005 Harley-Davidson factory
sound system. They are designed to
fit your stock fairing and speaker
rings, and provide a cost effective
improvement in sound quality.
Key Features:
- 1"
PEI dome coax-mounted tweeter
-
5.25" polypropylene mid-range cone
- 8
oz. magnet with rubber cover
- ¼”
thick foam gasket on mounting
surface
-
Sold in pairs
Specifications:
- 8
ohm, 25mm voice coil
- 40
Watts RMS, 120 Watts Peak (Rated -
40 Watts)
Note: Stock 1998-2005
Harley-Davidson radios utilize 8
ohm speaker outputs. These
speakers are designed to replace
1998-2005 factory speakers only.
They should never be connected to
any of our 4 ohm amplifiers.
Failure to follow this guideline
can cause damage to your speakers,
and will void your warranty.
Want to find
out if this Hawg Wired part will fit
your Harley?
See our
fitment guide for more information.
|
BT508-40
8 Ohm Upgrade Speakers
Kit Includes:
-
2 – BT508-40 Coaxial
Upgrade Speakers
-
Installation Instructions
|
Only the
best will do? I give you the highest
performance speaker the motorcycle
audio market has to offer:
Introducing our new component series
5.25" 4 ohm speakers and crossovers.
With the tweeter bridge-mounted over
the mid-range cone, you don't have
to give up gauge holes to achieve
crystal clear quality sound that
only component speakers can deliver.
Like all of our speakers, they are
designed to fit your stock fairing
and speaker rings. Hands down, the
best possible match-up to any of our
amplifier systems.
Key Features:
-
1.25" bridge-mounted component
tweeter
-
5.25" solid polypropylene cone
- 12
oz. magnet with rubber boot
- ¼”
thick foam gasket on mounting
surface
-
Sold in pairs
Specifications:
- 4
ohm, 25mm voice coil
- 70
Watts RMS, 200 Watts Peak (Rated -
70 Watts)
Note: Stock 1998-2006
Harley-Davidson radios utilize 2
ohm or 8 ohm speaker outputs. Due
to the 4 ohm voice coils used in
these speakers (and most other
aftermarket speakers), they should
not be connected directly to the
stock radio speaker outputs.
Failure to follow this guideline
can cause damage to your radio,
and will void your warranty.
Want to find
out if this Hawg Wired part will fit
your Harley?
See our
fitment guide for more information.
|
CX504-70
4 Ohm Component Speakers
Kit Includes:
2 – CX504-70 Component
Speakers
2 – CXR04-100 External
Crossovers
Installation Instructions
|
|
|
|
