Note: The
HSA150 Adapter is plug and play compatible with the
following factory harness connectors.
YEAR
MODEL
MODEL ID
1998-2002
Road Glide
FLTR, FLTRI
Electra Glide Standard
FLHT
Electra Glide Classic
FLHTC, FLHTCI
Electra Glide Ultra Classic
FLHTCUI
2003-2005
Road Glide
FLTRI
Electra Glide Standard
FLHT, FLHTI
Electra Glide Classic
FLHTC, FLHTCI
Electra Glide Ultra Classic
FLHTCUI
2006
Road Glide
FLTRI
Street Glide
FLHX, FLHXI
Electra Glide Standard
FLHT, FLHTI
Electra Glide Classic
FLHTCI
Electra Glide Ultra Classic
FLHTCUI, FLHTCUSE
Note: The
HSA150 Adapter is designed for Sony radios featuring
the 3.5mm phono jack OEM remote control connector and
16 pin main harness connector. The following is a list
of known compatible Sony source unit model numbers.
Note: Stock
1998-2006 Harley-Davidson speakers utilize 2 ohm or 8
ohm voice coils. Due to the 4 ohm speaker output of
our amplifiers (and most other aftermarket
amplifiers), they should not be connected directly to
stock speakers. Failure to follow this guideline can
cause damage to your amplifier and/or speakers, and
void your warranty.
Note: Stock
1998-2006 Harley-Davidson speakers utilize 2 ohm or 8
ohm voice coils. Due to the 4 ohm speaker output of
our amplifiers (and most other aftermarket
amplifiers), they should not be connected directly to
stock speakers. Failure to follow this guideline can
cause damage to your amplifier and/or speakers, and
void your warranty.
Note: Tour-Pak
speaker pods or custom speaker mounting required to
utilize 4 channels.
Note: Stock
2006 Harman/Kardon / Harley-Davidson radios utilize 2
ohm speaker outputs. These speakers are designed to
replace 2006 factory speakers only. They should never
be connected to any of our 4 ohm amplifiers. Failure
to follow this guideline can damage your speakers, and
void your warranty.
Note: Stock
1998-2005 Harley-Davidson radios utilize 8 ohm speaker
outputs. These speakers are designed to replace
1998-2005 factory speakers only. They should never be
connected to any of our 4 ohm amplifiers. Failure to
follow this guideline can damage your speakers, and
void your warranty.
Note:
Recommended for amplifiers and aftermarket or CVO 4
ohm source units only. Stock 1998-2006 Harley-Davidson
radios utilize 2 ohm or 8 ohm speaker outputs. Due to
the 4 ohm voice coils used in these speakers (and most
other aftermarket speakers), they should not be
connected directly to the stock radio speaker outputs.
Failure to follow this guideline can damage your
radio, and void your warranty.
